Determination of Micromovements in Removable Prosthesis during Mastication: A Pilot Study with 3D Electromagnetic Articulography.

Edentulism can generate negative impacts on self-esteem, interpersonal relationships, and oral functions. Removable prostheses are commonly used for tooth replacement, but they may cause discomfort due to micromovements during mastication. Objective and quantifiable methods are needed to evaluate these micromovements. A pilot study was conducted to determine the micromovements in removable prostheses during mastication using a 3D electromagnetic articulography (EMA-3D) system. One elderly participant wearing lower removable prostheses and an upper total well-fitting removable prosthesis was studied. The EMA-3D system was used to record movements in three spatial planes. Peanuts were given as test food, and the participant was instructed to chew normally while recordings were carried out until feeling the need to swallow. Analyses of the upper total prosthesis show micromovements ranging from 0.63 ± 0.11 to 1.02 ± 0.13 mm. During simultaneous analyses of the upper prosthesis and lower partial prosthesis, interference was not observed. This pilot study demonstrated the feasibility of using the EMA-3D system to evaluate micromovements in removable prostheses during mastication. Further research is needed to evaluate a larger sample and assess the clinical implications of these micromovements.

Unificación Término Fossa y Fovea en Terminologia Anatomica / Unification of the Term Fossa and Fovea in Anatomical Terminology

Los términos fossa y fovea se encuentran en Terminologia Anatomica, sin embargo, no existe una diferencia clara entre ambos términos. Por este motivo, el objetivo de este estudio fue determinar la coherencia entre la relación léxica, morfológica y etimológica de los términos fossa y fovea con su utilización en Terminologia Anatomica. Los términos fossa y fovea fueron consultados en Terminologia Anatomica (Federative International Programme for Anatomical Terminology, 2019) y en Terminologia Anatomica Internacional (Federative Committee on Anatomical Terminology, 2001). Posteriormente se realizó la búsqueda de ambos términos en diccionarios latín-español e inglés-latín. Finalmente fueron consultados los términos fossa y fovea en el Diccionario de la Real Academia Española y en el Diccionario panhispánico de términos médicos de la Real Academia Nacional de Medicina de España para conocer las definiciones en el área médica. La búsqueda reportó que el término "fosa" proviene del latín fossa, que significa "excavación, foso, fosa; hoyo, agujero". Por su parte "fóvea" proviene del latín fovea que significa"hoyo pequeño". Por lo tanto, la diferencia de fossa y fovea está determinada por su tamaño según sus definiciones. Sin embargo, en Terminologia Anatomica se han descrito estructuras con el diminutivo de fossa y fovea lo que complejiza la diferenciación de los términos según su tamaño. Además, la falta de unificación en la nomenclatura entre fossa, fovea y sus diminutivos, genera una gran confusión e incoherencias en las traducciones del latín al inglés y al español en Terminologia Anatomica que merman la precisión de la nomenclatura. Por lo tanto se propone la unificación de los términos fossa y fovea en base al tamaño de la depresión anatómica y clarificar su traducción al inglés y español.

SUMMARY: The terms fossa and fovea are found in Terminologia Anatomica, however, there is no clear difference between both terms. Therefore, the objective of this study was to determine the coherence between the lexical, morphological and etymological relationship of the term's fossa and fovea with their use in Terminologia Anatomica. The terms fossa and fovea were consulted in Terminologia Anatomica (Federative International Programme for Anatomical Terminology, 2019) and in International Anatomical Terminology (Federative Committee on Anatomical Terminology, 2001). Subsequently, a search for both terms was carried out in Latin-Spanish and English-Latin dictionaries. Finally, the terms fossa and fovea were consulted in the Diccionario de la Real Academia Española and in the Diccionario panhispánico de términos médicos de la Real Academia Nacional de Medicina de España to know the definitions in the medical area. The search reported that the term "fossa" comes from the Latin fossa, which means "excavation, ditch, ditch; hole, hole." For its part, "fovea" comes from the Latin fovea, which means "small hole." Therefore, the difference between fossa and fovea is determined by their size according to their definitions. However, in Terminologia Anatomica, structures have been described with the diminutive of fossa and fovea, which makes the differentiation of the terms according to their size more complex. Furthermore, the lack of unification in the nomenclature between fossa, fovea and their diminutives generates great confusion and inconsistencies in the translations from Latin to English and Spanish in Terminologia Anatomica that reduce the precision of the nomenclature. Therefore, we propose the unification of the terms fossa and fovea based on the size of the anatomical depression and clarify their translation into English and Spanish.

Chewing Analysis by Means of Electromagnetic Articulography: Current Developments and New Possibilities.

Chewing is a complex procedure that involves sensory feedback and motor impulses controlled by the trigeminal system in the brainstem. The analysis of mandibular movement is a first approximation to understanding these mechanisms. Several recording methods have been tested to achieve this. Video, ultrasound, the use of external markers and kinesiographs are examples of recording systems used in research. Electromagnetic articulography is an alternative method to those previously mentioned. It consists of the use of electromagnetic fields and receiver coils. The receiver coils are placed on the points of interest and the 3D coordinates of movement are saved in binary files. In the Oral Physiology Laboratory of the Dental Sciences Research Center (Centro de Investigación en Ciencias Odontológicas-CICO), in the Faculty of Dentistry at the Universidad de La Frontera (Temuco, Chile) several research studies have been carried out using the AG501 3D EMA articulograph (Carstens Medizinelektronik, Lenglern, Germany). With this device, they developed a series of protocols to record mandibular movement and obtain new information, such as the 3D Posselt polygon, the area of each polygon, individualized masticatory cycles and speed and acceleration profiles. Other investigations have analyzed these parameters, but separately. The AG501 allows for holistic analysis of all these data without altering natural movement. A limitation of this technology is the interference generated by its metallic elements. The aim of the present work is to show the developed methods used to record mandibular movement in the CICO, using the AG501 and compare them with others used in several research studies.

Characterization of Mandibular Border Movements and Mastication in Each Skeletal Class Using 3D Electromagnetic Articulography: A Preliminary Study.

Mandibular movement recording is relevant for the planning and evaluation of mandibular function. These movements can include mandibular border movements (MBM) or mastication. Our objective was to characterize the kinematics of MBM and mastication among skeletal classes I, II, and III in the three spatial planes. A descriptive cross-sectional study was conducted with 30 participants. Instructions were provided on how to form Posselt's envelope and to perform masticatory. After data processing, we obtained numerical values for the areas, trajectories, and ranges of MBM that formed Posselt's envelope and the values for speed, masticatory frequency, and the areas of each masticatory cycle. Significant differences were found in the area of Posselt's envelope in the horizontal plane between skeletal classes I and III and in the range of right laterality between skeletal classes II and III. Mastication showed significant differences in the area of the masticatory cycles in the horizontal plane between classes I and III and between classes II and III. In conclusion, there were differences in MBM and mastication between skeletal classes III and I in the horizontal plane. This study supports the need to establish normal values for mandibular kinematics in skeletal class III.

Determination of Mandibular Position and Mouth Opening in Healthy Patients and Patients with Articular and/or Muscular Pathology: A Pilot Study with 3D Electromagnetic Articulography and Surface Electromyography.

Temporomandibular disorders (TMDs) are a group of pathologies that affect the temporomandibular joint and its related structures, producing intracapsular and muscular pathologies. The aim of this study is to describe, by electromagnetic articulography (EMA) and simultaneous electromyography (sEMG), the mandibular postural position and mouth opening in healthy patients and with articular and/or muscular pathology. MATERIALS AND METHODS: A pilot study was conducted with a sample of sixteen participants aged 18 years or older who attended the TMDs and Orofacial Pain Polyclinic of the University of La Frontera due to TMDs. The physiological inoculation space was evaluated from the mandibular postural position (MPP) with swallowing command and without command, in both healthy patients and patients with articular, muscular, and mixed TMDs, measured simultaneously with EMA and sEMG. An angular measurement of the oral opening was also performed with the data obtained. RESULTS: The physiological inoculation space was obtained from the determination of the MPP through the procedures with swallowing command and without command, and different mouth opening degrees were evaluated. CONCLUSIONS: Simultaneous position and sEMG records can be produced from EMA, and different characterization variables such as the vertical distance, Euclidean distance, and angle can be obtained.

Potential of Oral Cavity Stem Cells for Bone Regeneration: A Scoping Review.

Bone loss is a common problem that ranges from small defects to large defects after trauma, surgery, or congenital malformations. The oral cavity is a rich source of mesenchymal stromal cells (MSCs). Researchers have documented their isolation and studied their osteogenic potential. Therefore, the objective of this review was to analyze and compare the potential of MSCs from the oral cavity for use in bone regeneration. METHODS: A scoping review was carried out following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses extension for Scoping Reviews (PRISMA-ScR) guidelines. The databases reviewed were PubMed, SCOPUS, Scientific Electronic Library Online (SciELO), and Web of Science. Studies using stem cells from the oral cavity to promote bone regeneration were included. RESULTS: A total of 726 studies were found, of which 27 were selected. The MSCs used to repair bone defects were (I) dental pulp stem cells of permanent teeth, (II) stem cells derived from inflamed dental pulp, (III) stem cells from exfoliated deciduous teeth, (IV) periodontal ligament stem cells, (V) cultured autogenous periosteal cells, (VI) buccal fat pad-derived cells, and (VII) autologous bone-derived mesenchymal stem cells. Stem cells associate with scaffolds to facilitate insertion into the bone defect and to enhance bone regeneration. The biological risk and morbidity of the MSC-grafted site were minimal. Successful bone formation after MSC grafting has been shown for small defects with stem cells from the periodontal ligament and dental pulp as well as larger defects with stem cells from the periosteum, bone, and buccal fat pad. CONCLUSIONS: Stem cells of maxillofacial origin are a promising alternative to treat small and large craniofacial bone defects; however, an additional scaffold complement is required for stem cell delivery.

Lesión Fibro-ósea de Mandíbula: Un Hallazgo Radiográfico / Fibro-osseous Lesion of the Mandible: A Radiographic Finding

Las lesiones fibro-óseas son consideradas benignas y componen un grupo de patologías de desórdenes que se caracterizan por el reemplazo de un hueso normal por un tejido compuesto de fibras colágenas, fibroblastos y tejido mineralizado. Presentamos un hallazgo radiográfico obtenido de un paciente de sexo masculino de 41 años de edad que asiste a un centro de radiología para realizarse una radiografía panorámica, el examen revela un interesante hallazgo radiográfico en la hemi mandíbula izquierda, donde se observa una lesión fibro-ósea con expansión ósea a nivel de reborde marginal y cortical basal mandibular, desplazamiento de canal mandibular, desplazamiento dentario, compromiso de cortical alveolar y rizálisis en diferentes niveles en los dientes adyacentes a la lesión. De acuerdo a los antecedentes anteriores se establece una hipótesis diagnóstica de Fibroma Osificante de larga data debido a su radiopacidad. La Organización Mundial de la Salud lo clasifica como una neoplasia ósea benigna con afección al esqueleto craneofacial, de mayor incidencia en mandíbula, se presenta generalmente entre la 3º y 4º década de vida. Concluimos que las lesiones fibro-óseas pueden ser detectadas como un hallazgo radiográfico, esto es relevante para un tratamiento precoz, sin embargo, el diagnóstico debe realizarse complementando los antecedentes clínicos e histopatológicos de la lesión, poniendo especial atención en el diagnóstico diferencial.

Fibro-osseous lesions are considered benign and make up a group of disorder pathologies that are characterized by the replacement of normal bone by tissue composed of collagen fibers, fibroblasts, and mineralized tissue. We present a radiographic finding obtained from a 41-year-old male patient who attended a radiology center for a panoramic radiograph. The examination revealed an interesting radiographic finding in the left hemi-mandible, where a fibro-osseous lesion was observed. with bone expansion at the level of the marginal ridge and basal mandibular cortex, displacement of the mandibular canal, dental displacement, compromise of the alveolar cortex and rizalysis at different levels in the teeth adjacent to the lesion. According to the previous antecedents, a long-standing diagnostic hypothesis of Ossifying Fibroma is established due to its radiopacity. The World Health Organization classifies it as a benign bone neoplasm affecting the craniofacial skeleton, with the highest incidence in the jaw, generally presenting between the 3rd and 4th decade of life. We conclude that fibro-osseous lesions can be detected as a radiographic finding, this is relevant for early treatment, however the diagnosis must be made by complementing the clinical and histopathological history of the lesion, paying special attention to the differential diagnosis.

Área de Céntrica, Revisión del Concepto. Una Revisión Narrativa / Central Area, Review of the Concept. A Narrative Review

La búsqueda de una oclusión ideal es uno de los principales objetivos de los tratamientos rehabilitadores. Para que esta se cumpla, es necesario que se presenten ciertas características, en base a esto, se ha constituido el concepto de "tríada en céntrica", que se define como la coincidencia entre la relación céntrica fisiológica (RCF), posición muscular de contacto (PMC) y posición de máxima intercuspidación (PMI), existiendo de esta forma un equilibrio morfofuncional óptimo de los diferentes componentes del sistema estomatognático. Así nace la necesidad de analizar los conceptos que involucren la relación existente entre las distintas posiciones mandibulares, dentro de estos conceptos encontramos el "área de céntrica", que debido a sus características, se le atribuye relevancia y utilidad clínica cuando se entiende su aplicación. El objetivo de este estudio fue analizar el concepto de área céntrica, actualizar los conceptos oclusales asociados y proponer nuevas metodologías para su evaluación. En ocasiones existen interferencias oclusales que impiden que la mandíbula continúe su recorrido habitual para llegar a determinada posición, estas interferencias se conocen como contactos prematuros, cuando estos existen, naturalmente la mandíbula se desvía hacia una posición de acomodo. El deslizamiento en céntrica se define como el movimiento de la mandíbula mientras se encuentra posición retruida de contacto no forzada, es decir, la posición de contacto que se produce cuando la mandíbula se cierra en RCF, hasta llegar a PMI, este deslizamiento se produce debido a la presencia de contactos prematuros, cuando no existen contactos prematuros, esta posición coincidirá con PMI. El área de céntrica se define como el deslizamiento de la mandíbula entre la posición retruída ligamentosa (PRL) y PMI. Idealmente, la PMI se da cuando los cóndilos están en RCF y coincide con la PMC, debe existir siempre un área de céntrica, pues fisiológicamente ninguna articulación adoptara naturalmente una posición extrema como la PRL.

The search for an ideal occlusion is one of the main objectives of rehabilitation treatments. For this to be fulfilled, some characteristics need to be present, based on this, the concept of "centric triad" has been constituted, which is defined as the coincidence between the physiological centric relation (CR), muscular contact position (MCP) and maximum intercuspal position (MIP), thus existing an optimal morphofunctional balance of the different components of the stomatognathic system. In this way, the need arises to analyze the concepts that involve the relationship between the different mandibular positions, within these concepts we find the "centric area", which due to its characteristics, it is attributed relevance and clinical utility when its application is understood. The objective of this study was to analyze the concept of centric area, update the associated occlusal concepts and propose new methodologies for its evaluation. Sometimes there are occlusal interferences that prevent the jaw from continuing its usual path to reach a certain position, these interferences are known as premature contacts, when they exist, the jaw naturally deviates towards a position of accommodation. Centric slide is defined as the movement of the mandible when it is in a retruded contact position unforced, that is, the contact position that occurs when the mandible closes in CR, until reaching MIP, this sliding occurs due to in the presence of premature contacts, when there are no premature contacts, this position will coincide with PMI. The centric area is defined as the slippage of the mandible between the retruded ligamentous position (RLP) and MIP. Ideally, the PMI occurs when the condyles are in CR and coincides with the MCP, there should always be a centric area, since physiologically no joint will naturally adopt an extreme position like PRL.

Una Revisión de los tipos de Fraude Científico más Frecuentes / A Review of the most frequent types of Scientific Fraud

La presión que existe hoy por publicar ha llevado a que muchos investigadores cometan malas conductas científicas, siendo el fraude la más grave de todas. Este ocurre en forma de fabricación, falsificación, plagio, problemas de autoría, manipulación de imágenes y publicaciones redundantes. El fraude científico se define como una tergiversación deliberada por parte de alguien que conoce la verdad. En la historia de la humanidad se han conocido importantes casos de fraude científico, dentro de ellos se pueden destacar: el hombre de Piltdown, caso Shinichi Fujimura, el escándalo de las vacunas, caso Pearce, el caso Yoshitaka Fujii, entre otros. Con el objetivo de neutralizar el fraude, se han desarrollado diferentes estrategias dirigidas a detectarlo, dentro de ellas encontramos: evaluación mediante pares evaluadores, programas de Conducta de Investigación Responsable (RCR), regulaciones que la misma comunidad científica realiza, donde encontramos la fundación PubPeer y el blog For Better Science. Del mismo modo, se han impuesto diferentes medidas para contrarrestar el fraude, tales como: transparencia de las presiones y oportunidades, disponibilidad pública de los datos que sustentan la hipótesis y denuncia pública de los fraudes científicos. El impacto de un fraude trae consecuencias importantes para la ciencia, estudiar a partir de información falsa o errónea conlleva a un gran retroceso en los avances científicos del mundo actual. Es responsabilidad de cada uno ser consciente de lo que se escribe y lo que se lee, ya que como se sabe, esa es la única manera de combatirlo. Como investigadores somos responsables de actuar éticamente en nuestras investigaciones y tener conocimiento de las medidas que existen hoy para detectar y combatir el fraude científico.

The pressure to publish today has led many researchers to commit scientific misconduct, fraud being the most serious of all. This occurs in the form of fabrication, falsification, plagiarism, authorship problems, image manipulation, and redundant posting. Scientific fraud is defined as deliberate misrepresentation by someone who knows the truth. In the history of humanity, important cases of scientific fraud have been known, among them the following can be highlighted: the Piltdown man, the Shinichi Fujimura case, the vaccine scandal, the Pearce case, the Yoshitaka Fujii case, among others. In order to neutralize fraud, different strategies have been developed to detect it, among them we find: evaluation by peer reviewers, Responsible Research Conduct (RCR) programs, regulations that the scientific community itself carries out, where we find the PubPeer Foundation and the For Better Science blog. Similarly, different measures have been imposed to counteract fraud, such as: transparency of pressures and opportunities, public availability of the data that support the hypothesis, and public denunciation of scientific fraud. The impact of a fraud has important consequences for science, studying from false or wrong information leads to a great setback in scientific advances in the world today. It is the responsibility of each one to be aware of what is written and what is read, since as is known, that is the only way to combat it. As researchers we are responsible for acting ethically in our research and being aware of the measures that exist today to detect and combat scientific fraud.

Cincuenta años del Departamento de Medicina del Dolor y Paliativa del Instituto Nacional de Ciencias Médicas y Nutrición «Salvador Zubirán¼ / Fifty anniversary of the department of pain and palliative medicine at the Instituto Nacional de Ciencias Médicas y Nutrición «Salvador Zubirán¼

Resumen: Introducción: En México, la primera clínica especializada en el alivio del dolor fue fundada en 1972 por el Dr. Ramón De Lille Fuentes en el Instituto Nacional de Ciencias Médicas y Nutrición «Salvador Zubirán¼ (INCMNSZ). Material y métodos: Se realizó una búsqueda histórica documental y entrevistas a quienes han colaborado con el Departamento de Medicina del Dolor y Paliativa del INCMNSZ desde su fundación. Resultados: Nuestra visión es ofrecer atención del dolor, cuidados paliativos y apoyo continuo. Para ello, documentamos nuestra historia y los logros del departamento. Conclusiones: A 50 años de su fundación, el Departamento de Medicina del Dolor y Paliativa del INCMNSZ es un foro de desarrollo científico y de formación de capital humano con un enfoque humanista.

Abstract: Introduction: In Mexico, the first clinic specializing in pain relief was founded in 1972 by Dr. Ramón De Lille Fuentes at the Instituto Nacional de Ciencias Médicas y Nutrición «Salvador Zubirán¼ (INCMNSZ). Material and methods: A historical documentary search and interviews were carried out with those who have collaborated with the Department of Pain and Palliative Medicine of the INCMNSZ since its foundation. Results: Our vision is to offer pain management, palliative care, and ongoing support. To do this, we document the history and achievements of the department. Conclusions: 50 years after its foundation, the INCMNSZ Department of Pain and Palliative Medicine is a forum for scientific development and human capital training with a humanistic approach.

Articulación temporomandibular ¿disco o menisco articular? / Temporomandibular joint, disc or articular meniscus

Los términos disco y menisco se encuentran en Terminologia Anatomica. Sin embargo, ambos términos son utilizados como sinónimos para referirse al cartílago intraarticular presente en la articulación temporomandibular (ATM). Por este motivo, el objetivo de este estudio es exponer las raíces griegas de los términos disco y menisco para evaluar la coherencia entre su relación léxica y su relación morfológica. Ambos términos fueron consultados en el Programa Federativo Internacional de Terminología Anatómica y en diccionarios de idiomas griego, español e inglés. La búsqueda reportó que el término "disco" deriva del latín discus, y este a su vez del griego δίσκος [dískos] que significa "cuerpo cilíndrico cuya base es muy grande respecto a su altura". Por su parte "menisco" proviene del griego mēnískos μηνίσκος [mḗn μήν gr. μείς 'meis', 'luna creciente' + -iskos gr. Sufijo diminutivo 'pequeño'] que significa "luna creciente pequeña" y se define como "cartílago de forma semilunar y de espesor menguante de la periferia al centro; forma parte de la articulación de la rodilla". Por lo tanto, la definición anatómica de disco articular y menisco está determinada por su morfología según la etimología de la palabra. En la ATM se encuentra un disco articular entre los huesos articulares, según su morfología.

SUMMARY: The terms disc and meniscus are found in Terminologia Anatomica. However, both terms are used synonymously to refer to the intra-articular cartilage present in the temporomandibular joint (TMJ). For this reason, this study aims to expose the greek roots of the terms disc and meniscus to evaluate the coherence between their lexical and morphological relationships. Both terms were consulted in the International Federative Program of Anatomical Terminology and in Greek, Spanish and, English dictionaries. The search reported that the term "disc" derives from the Latin discus, and this in turn from the Greek δίσκος [dískos], which means "cylindrical body whose base is very large compared to its height". For its part, "meniscus" comes from the Greek mēnískos μηνίσκος [mḗn μήν gr. μείς 'meis', 'crescent moon' + -iskos Gr. Diminutive suffix 'small'] which means "small crescent moon" and, is defined as "cartilage with a semilunar shape and decreasing thickness from the periphery to the center; It is part of the knee joint. Therefore, the anatomical definition of articular disc and meniscus is determined by its morphology according to the etymology of the word. In the TMJ, an articular disc is found between the articular bones, depending on their morphology.

Actualización del análisis de los movimientos mandibulares a través de articulografía electromagnética / Updating the analysis of mandibular movements through electromagnetic articulography

El objetivo de registrar los movimientos mandibulares es obtener parámetros relevantes que permitan evaluar el estado de la articulación temporomandibular (ATM) y de los músculos involucrados en la masticación. El movimiento mandibular se debe a un conjunto complejo de rotaciones y traslaciones tridimensionales realizadas por la ATM, limitado por los ligamentos y las superficies articulares de estas, y por la morfología y la alineación de los dientes, cuando la mandíbula se desplaza sobre estos límites, se llaman movimientos bordeantes mandibulares. El objetivo de este artículo es realizar una descripción actualizada de los movimientos mandibulares a través de articulografía electromagnética. Los movimientos mandibulares bordeantes se clasifican según el plano del espacio en que se muevan, de esta manera tenemos movimientos bordeantes en el plano sagital, en el plano horizontal y el plano frontal, y en cada plano dibujan un polígono distinto, llamados polígonos de Posselt. Estos polígonos pueden ser registrados mediante Articulografía electromagnética, gracias a esta tecnología también se pueden extraer algunos parámetros interesantes, como por ejemplo: la trayectoria total recorrida por la mandíbula al describir cada polígono, rangos de desplazamiento en cada plano, área total de cada polígono de Posselt. La apertura mandibular se mide como la distancia entre los márgenes incisales de los incisivos centrales superiores e inferiores en apertura máxima más la sobremordida. El análisis de esta es una parte importante del examen clínico en odontología, ya que una apertura limitada puede ser resultado de trastornos en la articulación temporomandibular, fibrosis oral submucosa, enfermedad reumática o trauma facial. Las mediciones tridimensionales que se obtienen gracias a la Articulografía electromagnética, son apropiados para determinar los rangos normales de apertura, su exactitud permite la realización de investigaciones en el área, abriendo un amplio campo en el análisis de los movimientos mandibulares.

SUMMARY: The objective of recording mandibular movements is to obtain relevant parameters that allow the evaluation of the state of the temporomandibular joint (TMJ) and of the muscles involved in mastication. Mandibular movement is due to a complex set of three-dimensional rotations and translations performed by the TMJ, limited by the ligaments and their articular surfaces, and by the morphology and alignment of the teeth, when the mandible moves over these limits, they are called mandibular border movements. The aim of this article is to provide an updated description of mandibular movements through electromagnetic articulography. Mandibular border movements are classified according to the plane of space in which they move, thus we have border movements in the sagittal plane, in the horizontal plane and the frontal plane, and in each plane they draw a different polygon, called Posselt polygons. These polygons can be recorded by electromagnetic articulography, thanks to this technology some interesting parameters can also be extracted, such as: the total trajectory covered by the mandible when describing each polygon, displacement ranges in each plane, total area of each polygon of Posselt. Mandibular opening is measured as the distance between the incisal edges of the upper and lower central incisors at maximum opening plus the overbite. The analysis of mandibular opening is an important part of the clinical examination in dentistry as a preliminary evaluation, since limited opening can be the result of temporomandibular joint disorders, submucous oral fibrosis, rheumatic disease or facial trauma. The three-dimensional measurements that are obtained thanks to the electromagnetic Articulography, are appropriate to determine the normal ranges of opening, its accuracy allows the realization of investigations in the area, opening a wide field in the analysis of mandibular movements. Analysis of mandibular opening is an important part of the clinical examination in dentistry, since limited opening can be the result of temporomandibular joint disorders, oral submucous fibrosis, rheumatic disease, or facial trauma. Analysis of mandibular opening is an important part of the clinical examination in dentistry, since limited opening can be the result of temporomandibular joint disorders, oral submucous fibrosis, rheumatic disease, or facial trauma. The three-dimensional measurements that are obtained thanks to the electromagnetic Articulography, are appropriate to determine the normal ranges of opening, its accuracy allows the realization of investigations in the area, opening a wide field in the analysis of mandibular movements.

MCDA-DEA approach to construct a composite indicator for effluents from WWTPs considering the influence of PPCPs.

Considering current water situation, reuse is an effective solution to meet water demand and reduce pressure on conventional water sources. However, pharmaceutical and personal care products (PPCPs) in effluents from wastewater treatment plants (WWTPs) decrease their quality and suitability. With the aim of identifying and monitoring both the influence of PPCPs and the suitability of effluents to be reused, this study proposes the development of a composite indicator (CI) related to PPCP presence in WWTPs, through the common weight multi-criteria decision analysis (MCDA)-data envelopment analysis (DEA) model. Obtaining a CI for PPCPs is a novel approach in the published literature, showing a new perspective in PPCP management and their influence in wastewater treatment. Furthermore, this study proposes an improvement on MCDA-DEA model which maintains the initial hierarchy obtained for the units analyzed. The development of CI is based on information about the technological, environmental, social, and biological issues of WWTPs. Results show that 4 of the 33 WWTPs analysed had the best CI values, meaning that their effluents have lower environmental impact. The development of a CI related to PPCPs in WWTPs suggests that further steps are needed to manage the WWTP effluents. Hence, the need to implement preventive measures in WWTPs has been shown, even though the removal of PPCPs is not yet part of European law. This work highlights the importance of considering PPCPs as priority pollutants in wastewater management and reuse frameworks, to guarantee low environmental impact and adapt wastewater reuse based on a circular economy approach. HIGHLIGHTS: Emerging contaminants (PPCPs) are used as effluent quality indicators. A composite indicator for PPCPs performance has been developed through MCDA-DEA model. Indicator obtained allow decision makers implementing concrete actions to assess effluent quality. Results show the improvement capacity of the effluents quality through PPCPs removing.

Palatal brushing for the treatment of denture stomatitis: A multicentre randomized controlled trial.

PURPOSE: To determine the effectiveness of palatal brushing in the treatment of denture-related erythematous stomatitis (DES) in complete denture wearers. METHODS: This two-parallel-arm RCT was conducted in three university clinics in Brazil, Canada, and Chile. Participants (n=77) were randomly allocated to receive (i) instructions for palatal brushing and standard oral/denture hygiene ("intervention"); or (ii) standard oral/denture hygiene instructions only ("control"). Data collection was carried out at the baseline and at 3 and 6 months after intervention. Outcomes included the magnitude of oral Candida carriage and the degree of inflammation of denture-bearing tissues. Groups were compared using generalized estimating equations and chi-square test (α=0.05). RESULTS: Palatal inflammation levels were reduced significantly in the "intervention" compared to "control" group at 6 months (intervention: 70%, control: 40%; chi-square, p=0.04). There was no between-group significant difference in the Candida count from denture and palatal biofilms; however, a subgroup analysis restricted to baseline Candida carriers showed further reduction with the intervention at 6 months. No adversity was observed by trialist or reported by participants. CONCLUSIONS: Including palatal brushing in oral instructions for denture wearers has positive impact on DES-related mucosal inflammation. Thus, our findings endorse the inclusion of palatal brushing in standard oral hygiene instructions to treat DES.

Características morfométricas de la mandíbula de rata: un estudio radiológico de un modelo experimental animal ampliamente utilizado a través de CBCT / Morphometric characteristics of rat mandibular bone: radiologic study of a widely used animal as experimental model through CBCT

La mandíbula de rata es una de las estructuras anatómicas de mayor interés en la investigación en las ciencias odontológicas, esto debido a su similitud con la mandíbula humana. El objetivo de este estudio fue caracterizar morfometricamente la mandíbula de ratas mediante CBCT. Se analizó el examen cone beam de 20 ratas hembras, adultas sanas. Mediante el software del examen, fue posible aislar la mandíbula derecha e izquierda de las otras estructuras y realizar adecuadamente las medidas morfométricas de interés. En la comparación de ambos lados, sólo dos medidas presentaron diferencias significativas. La distancia entre el punto más profundo de la escotadura sigmoidea hasta el punto más profundo de la escotadura en el margen inferior de la mandíbula, fue mayor en el lado izquierdo que en el derecho. Y la distancia entre el punto más superior del cóndilo hasta la base mandibular, en la proyección perpendicular del plano mandibular fue mayor en el lado izquierdo que en el derecho. De acuerdo a las medidas obtenidas, podemos determinar que la mandíbula de la rata es una estructura alargada, con dimensiones mayores en sentido anteroposterior en comparación con las medidas verticales. El conocimiento de la anatomía de la mandíbula de rata y sus variaciones por lado permite a los investigado- res tener referencias adecuadas para los estudios que involucren esta estructura, como por ejemplo, investigaciones que requieran la aplicación de técnicas anestésicas, estudio del dolor orofacial, estudio patofisiológico de la ATM, estudio del crecimiento óseo, testeo de biomateriales dentales o en el estudio de procesos fisiopatológicos relacionados con los tejidos dentales o periodontales. La mandíbula de la rata es un buen modelo animal debido a su reproducibilidad y bajo costo. La mandíbula derecha e izquierda son similares en sus dimensiones anteroposteriores, pero no las verticales.

SUMMARY: The rat jaw is one of the most interesting anatomical structures in dental science research, due to its similarity to the human jaw. The aim of this study was to morphometrically characterize the mandible of rats by CBCT. The cone beam examination of 20 healthy adult female rats was analyzed. Using the examination software, it was possible to isolate the right and left mandible from the other structures and adequately perform the morphometric measurements of interest. In the comparison of both sides, only two measures presented significant differences. The distance from the deepest point of the sigmoid notch to the deepest point of the notch at the lower margin of the mandible was greater on the left side than on the right. And the distance between the most superior point of the condyle to the mandibular base, in the perpendicular projection of the mandibular plane, was greater on the left side than on the right. According to the measurements obtained, we can determine that the rat jaw is an elongated structure, with larger dimensions in the anteroposterior direction compared to the vertical measurements. Knowledge of the anatomy of the rat mandible and its variations per side allows researchers to have adequate references for studies involving this structure, such as research that requires the application of anesthetic techniques, study of orofacial pain, pathophysiological study of the TMJ, study of bone growth, testing of dental biomaterials or in the study of pathophysiological processes related to den- tal or periodontal tissues. The rat mandible is a good animal model due to its reproducibility and low cost. The right and left mandible are similar in their anteroposterior dimensions, but not the vertical ones.

Effect of chewing behavior modification on food intake, appetite and satiety-related hormones: A Systematic Review

Purpose: Obesity has become a growing public health issue worldwide. Studies have shown that eating rate is one of the most important factors to consider in the strategies to prevent and/or treat obesity. Eating rate can be reduced through different strategies, such as an increase in oro-sensory exposure, the modification of food texture, and an increase in the number of chewing cycles. The aim of this systematic review was to analyze the available evidence regarding the effect of chewing behavior modification on the parameters that contribute to obesity. Methods: A systematic search was done on the electronic databases Pubmed, Cochrane Central Register of Controlled Trials, and Scopus, using the terms "mastication", "chewing", "chewing speed", "prolonged chewing", "number of chews", "masticatory cycles" "satiety" "satiety response" "appetite", "appetite regulation", "nutritional status" and "obesity". Results: A total of 23 intervention studies were selected that intervened in the participants' chewing behavior, either by reducing the eating rate, increasing oro-sensory exposure, food hardness or the number of chewing cycles. In most studies these interventions were effective at reducing food intake, subjective appetite and improving the plasma levels of satiety-related hormones and metabolites; moreover, they reduced body mass index in the long term. Conclusion: The currently available evidence seems to indicate that modifications to chewing behavior can bring with it a myriad of benefits for the treatment of obesity.

Propósito: La obesidad se ha convertido en un problema de salud pública creciente a nivel mundial. Investigaciones han demostrado que la tasa de ingesta es uno de los factores importantes a considerar en las estrategias para prevenir o tratar la obesidad. La tasa de ingesta puede reducirse a través de diferentes estrategias; el aumento de la exposición oro-sensorial, la modificación de la textura de los alimentos y el aumento en el número de ciclos masticatorios. El objetivo de esta revisión sistemática fue analizar la evidencia disponible sobre el efecto de la modificación de la conducta masticatoria sobre los parámetros que contribuyen a la obesidad. Métodos: Se realizó una búsqueda sistemática en las bases de datos electrónicas Pubmed, Cochrane Central Register of Controlled Trials y Scopus, con los términos "mastication", "chewing", "chewing speed", "prolonged chewing", "number of chews", "masticatory cycles" "satiety" "satiety response" "appetite", "appetite regulation", "nutritional status" y "obesity". Resultados: Se seleccionaron 23 estudios que intervenían en el comportamiento masticatorio de los participantes, ya sea reduciendo de la tasa de ingesta, aumentando la exposición oro-sensorial, dureza de los alimentos y número de ciclos masticatorios. Estas intervenciones resultaron ser efectivas para reducir la ingesta de alimentos, el apetito subjetivo y mejorar los niveles plasmáticos de las hormonas y metabolitos relacionados con la saciedad, además, a largo plazo, permitieron reducciones en el índice de masa corporal. Conclusión: La evidencia disponible actualmente parece señalar que las modificaciones en el comportamiento masticatorio pueden traer consigo múltiples beneficios para el tratamiento de la obesidad.

A Novel Technique to Accurately Measure Mouth Opening Using 3D Electromagnetic Articulography.

The mouth opening is an important indication of the functionality of the temporomandibular joint (TMJ). Mouth opening is usually evaluated by asking the patient to open their mouth as wide as possible and measuring the distance between the edges of the frontal incisors with a ruler or caliper. With the advancement of technology, new techniques have been proposed to record mandibular movement. The aim of this work is to present a novel technique based on 3D electromagnetic articulography and data postprocessing to analyze the mouth opening considering distances, trajectories, and angles. A maxilla-mandible phantom was used to simulate the mouth opening movement and fixed position mouth opening. This was recorded using the AG501 3D EMA (Carstens Medizinelektronik GmbH, Bovenden, Germany). The collected data was processed using Matlab (Mathworks, Natick, MA, USA). Fix and mobile mouth opening of 1, 2, 3 and 4 cm were simulated. It was possible to evaluate the mandibular opening through the vertical distance, the Euclidean distance, the trajectory, and the opening angle. All these values were calculated and the results were consistent with expectations. The trajectory was the highest value obtained while the vertical distance was the lowest. The angle increased as the mouth opening increased. This new technique opens up new possibilities in future research since oral opening can be analyzed using multiple variables without the need to use different devices or depending on the researcher's experience. This will make it possible to establish which parameter presents significant differences between groups of patients or between patients who have undergone some treatment.

Analysis of the Chemical Composition and Morphological Characterization of Tissue Osseointegrated to a Dental Implant after 5 Years of Function.

Osseointegration implies the coexistence of a biocompatible implant subjected to masticatory loads and living bone tissue adhered to its surface; this interaction is a critical process for the success of implants. The objective of this work is to analyze the osseoformation and osseointegration of a dental implant in operation for 5 years microscopically through morphological analysis of the surface and chemical composition through a variable pressure scanning electron microscope (VP-SEM) and energy dispersive X-ray spectrometry (EDX). The chemical composition and general characteristics of the structural morphology of random areas of the surfaces of an osseointegrated dental implant from an ex vivo sample were analyzed. On the surface of the implant free of bone tissue, titanium (TI) was mainly identified in the area of the implant threads and carbon (C) in the depth of the implant threads. Phosphorus (P), calcium (Ca), oxygen (O), carbon (C), with dense and homogeneous distribution, and, to a lesser extent, sodium (Na) were detected on the bone surface around the contour of the implant. Regarding the morphological characteristics of the implant surface, a rough structure with some irregularities and detachments of the implant lodged in the bone tissue was observed. Microscopic analysis showed calcified bone tissue distributed in an orderly manner on the coronal and medial surface and sinuous and irregular in the apical area, with the presence of red blood cells. The composition of the implant allows a dynamic process of bone remodeling and regeneration subject to the biological and mechanical needs of the operation. Dental implants are shown to have exceptional and long-lasting biocompatibility that enables the formation of mature peri-implant bone tissue.

Non-Syndromic Familial Mesiodens: Presentation of Three Cases.

Mesiodens are the most common supernumerary teeth and are detected incidentally during routine radiographic examination, so late diagnosis complications are very common. The dentist must make a timely diagnosis and thus avoid clinical complications. Despite advances in knowledge of dental morphogenesis and differentiation, the etiology of mesiodens remains unclear. Therefore, several theories have been postulated to explain how and why they develop. It was described in the literature that heredity could play an important role in the appearance of supernumerary teeth, with a higher rate of appearance in relatives of those affected. This article reports three cases, a mother and two children, who present mesiodens, which shows that supernumerary teeth may involve a genetic factor. In addition, a literature review was carried out to assess the importance of the genetic factor as a possible cause of mesiodens. The relevance and implications of timely diagnosis in clinical practice to avoid manifestations of clinical complications are discussed. Therefore, the identification of the genetic risk factors responsible for the formation of supernumerary teeth is essential for developing a screening tool to determine an individual's genetic risk.